SM Arnold RV SNO-PRO Snow Brush with Ice Scraper Handle

Video Transcript for Review of SM Arnold Winter Weather Supplies - Ice Scrapers - 381WM-903

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the SM Arnold RV SNO-PRO Snow Brush with Ice Scraper. So anytime you've ever experienced having a lot of snow come down on your vehicle, you know that getting it off of there can be kind of tricky. If you use your scraper, you might actually dig into your paint. There's nothing that feels like it's going to be wide enough to brush everything off.

A lot of those scrapers that have the brush on the side, it's only about six inches wide, so then you feel like you're having to push off in all these strokes. So this is going to be a better solution for those frequent heavy snow falls to get everything removed from our vehicle.It has this nice just foam oversized safety head. So it's going to push that snow off of our vehicle and allow us to get into our doors, turn on our engine, get everything starting to heat up. On the other side we'll have all foam grip on the back end of this scraper, so we'll have our more aggressive grooves there, for some of the thicker ice, a little thinner for more frost and lighter layers of ice as well. So we'll be able to chip away anything on our windshield, push away that snow and again, get everything cleaned off.This is just a foam layer so we don't have to worry about our paint getting scratched, any damage to our vehicle.

You can see it's got some nice give there. It does have a firm layer on the inside here. It's just a plastic layer, but will still have enough play around those edges that we won't have any worries about damaging it, but at least gives it a little bit of a backbone for that to work against, so it's not just going to flop over at the weight of the snow as you're pushing it. It's pretty nifty little tool. The one thing that I wish it did was collapsed down and maybe a fold in.

That's the one criticism I would have, but especially if you're using this in an RV, you'd probably be able to find a pretty easy spot to store this in.As far as the overall length, it's about 47 inches long front to back, from the front of our square head to the back of our ice scraper. The handle portion is about 42 inches. As far as the pusher piece, it's about 16 and a quarter inches long, by about six inches wide. The handle is made out of aluminum, so you don't have to worry about that rusting out over time on you. It should stay nice for a long while and also no worries about rust.

And it's also pretty lightweight as well. It is made in the USA and that's pretty much going to do it for our look at the SM Arnold RV SNO-PRO Snow Brush with Ice Scraper Handle.